home *** CD-ROM | disk | FTP | other *** search
- READ THE RELEASE.TXT
-
- To install Mass User Management v1.3 (MUM) on your machine, put the Mass User
- Management disk into drive A:. Run windows and select "Run" from the
- "File" menu. Type "A:install.exe" and follow the prompts.
-
- After you have installed Mass User Management onto your machine, add an
- icon for MUM in the Program Manager group of your choice.
-
- A couple of release notes:
- 1. The NetWare drivers that are being shipped with this version are the
- same drivers from WINUP8.ZIP on CompuServe and ftp.novell.com. These
- drivers are for use with NETX.EXE. If you are using the VLMs, do not
- overwrite your NetWare drivers during installation of MUM.
- 2. Complete on-line help is available. After you have installed MUM,
- refer to the on-line help.
- 3. If you try to run MUM and get the message "Cannot find file NETWARE.DLL",
- there is something wrong with your Windows Network configuration. Run
- "Windows Setup" from the "Main" program group. Select "Change System Settings"
- under the "Options" menu. Change the "Network" item to read "Novell NetWare
- (shell versions 3.26 and above)" and press "OK". Install new drivers from
- your original Windows disks. Restart Windows and run MUM again. If you
- still have the same problem, please contact us for help.
-
- If you have questions regarding MUM, you can contact us in three ways:
- 1. By e-mailing PARTNERS@world.std.com.
- 2. By writing us at:
- HOLMSTEAD PARTNERS
- P.O. Box 50452
- Provo, UT 84605-0452
- 3. By phoning us a (801) 375-8890. Please leave us a message if we don't
- answer and we will try to get right back to you.
-